Yh-bh-1390b CO2 Laser Engraver iyo Marin
Hordhac:
Astaamaha mashiinka
- Qaababka caadiga ah, hawlgal fudud, codsi aad u ballaaran, geedi socod dufcaddeed oo la hagaajiyay, hagaajisay hufnaanta.
- Galitaanka hore & gadaal ee saxanka sare ee saxanka sare ee lagu gudbo.
- Qaybaha laser-ka laga soo dejiyo oo leh cimri dherer sare, xasillooni, sax ah.
- Naqshadeynta macquulka ah ee xariiqda laser, ku hay xoog isku mid ah deked kasta, hubi in tayada shaqada.
- Ku dar hawl cusub si aad u isticmaasho si fudud, oo hal madax madax ah laba madax waxay kuxirantahay xulashooyinkaaga.
Codsiyada mashiinka
Qalabka Codsiga:
Acrylic, alwaax, bamboo, maro, marble, galaas dabiici ah, dhalo, caag, dhar, maqaar, caag, muraayad, galaasyada iyo alaabada kale ee aan noolaha ahayn.
Warshadaha codsiga:
Xayeysiinta, farshaxanka iyo farshaxanka, maqaarka, qalabka lagu ciyaaro, dharka, moodalka, dhisidda kor u qaadista, xisbiga kombiyuutarka, baakadaha, baakadaha iyo warshadaha waraaqaha.
XUQUUQDA:
| Nooc | Yh-bh-1390b |
| Aagga Shaqada (MM) | 1300 * 900 |
| Awoodda Laser caadiga ah | 80W / 100W / 130W |
| Nooca laser | Co2 shaabadaysan tuubbada laser, qaboojinta biyaha |
| Xawaareynta xawaaraha | 0-1000mm / s |
| Xawaaraha gooynta | 0-600mm / s |
| Dib-u-dejinta saxnaanta booska | <0.01mm |
| Dabeecad salka ugu badan | Jaantus / Ingiriis: 1x 1mm Shiine: 1.5 * 1.5mm |
| Awoodda sahayda | 220V±10% 50hz ama 110V±10% 60hz |
| Software ayaa taageeray | Artcut, Photoshop (Soo-Saar wax soo saarka) Coleldraw, AutoCad (Tooska Tooska ah) |
| Qaabka Taageerida | Plt, *. dxf, *. DXF, *. BMP, *. |
| Qaybaha caadiga ah |
|
| Qayb ikhtiyaar ah | 1. miiska kor iyo hoos 2.auto diiradda 3.RORYARY |
| Cabbirka mashiinka | 1780x1400x1030 Cabbirka xirmada:2180x1550x1250mm |
| Mashiinka gw | 480kg |
| Deegaanka orodka | Heerkulka: 0-45°, Qoyaanka: 5% -95% |
| Kafaalad | Hal sano, marka laga reebo qaybo yar oo la isticmaali karo. |
Halkan ku qor farriintaada oo noo soo dir
-
Talee gilid
-
E-mayl
-
WhatsApp
WhatsApp
-
waddamad
waddamad
18218409072
